NEW 16inch Macbook - does it fit???
It will fit in the front panel sleeve.
We do not know at this time if it will fit in the rear sleeve. We do not have one as it just came out (we are not likely to buy one either). The dims are close enough that we need to physically fit it in the rear. We will update when we have info to share.
Last updated: November 17, 2019 16:42
The Medium DSLR Core Unit is not compatible with the X30.
The Medium DSLR Core Unit is not compatible with the X30. Only the the Medium Mirrorless Core Unit
Last updated: November 17, 2019 16:42
Is the Action X30 the same size as the Explore 30?
The frame size and torso height is the same, but the depth of the new Action X 30 is shallower. This is why it only fits our Mirrorless Core Unit. The Mirrorless Core Units is design for Sony A7 series cameras but still fit Canon 5D sized bodies if grip-less. It matches the X30 depth. - Ian
Last updated: November 17, 2019 16:42
How Do Build My Own Kit?
Follow these steps.
-Scroll to the bottom of the page to the Add-On section. -Add up the cost of the gear you want. -Click Back This Project -Choose ‘Pledge with out Reward’ -Enter your total -Check out
We will contact you when the campaign is done and make sure everything is in order.
Last updated: November 17, 2019 16:42
How do you ship to the EU?
Product is shipped from Asia to our distribution hub in the Netherlands (at our expense) and then is shipped onward to you.
EDIT - ‘At our expense’ is referring to VAT - not actual shipping costs.
Last updated: November 17, 2019 16:42
What Is the minimum volume of the X30?
The X30 can compress down to almost nothing. The 30L is measured when the bag is fulled like in our marketing images. Front pocket and main compartments are both filled and measure by internal space occupied. It is not measured by external dimensions. X30, X50 and X70 are all measured the same. At max volume each bag can hold approximately 7 extra liters
Last updated: November 17, 2019 16:42
Does the X30 and X50 fit a Peak Designs Capture Clip?
Yes, the latest Peak Designs Capture Clip fits on the X30 and X50 shoulder straps, but is too small for the X70 and Plus strap set.
Last updated: November 17, 2019 16:42
Does the Small Core Unit fit the X30?
Yes, you can place a Small Core Unit inside an X30. You can fit it on its own or with a Medium Core Mirrorless Unit. The Small has a fold down rim design, which allows it to fit in the shallower depth X30.
Last updated: November 17, 2019 16:42
Does D.I.Y. Come with a Rain Cover?
Every DIY backpack pledge will come with a Rain Cover. It was mistakenly left off the D.I.Y Add-ons graphic.
Last updated: November 17, 2019 16:42
Does my camera body fit in the Mirrorless (ML) Core Unit?
If your kit is more than 12cm tall, you will compromise the fit of your camera gear. Anything over may stick out. With that said, the laptop sleeve and rear access panel are well padded. So if your gear is a little bit over it can still be comfortably worn and protected. Obviously the taller it is - the more it is compromised and potentially uncomfortable it will be.
Last updated: November 17, 2019 16:42
Is X50 Carry ON friendly?
Yes, the X50 fits most airline requirements for Carry On luggage. To this day (November 5th 2019), no one has reported having boarding issues.
Last updated: November 17, 2019 16:42
Is the X70 Carry On Friendly?
The frame size is almost the same as the X50, and as a result it can fit on some flights as Carry On. The overall size of the bag is bigger, so you need to be mindful of this, we do not suggest depending on the X70 as a Carry On friendly pack but it has successfully flown Carry On in the past.
Last updated: November 17, 2019 16:42
Can I order a Small Core Unit, Accessory Pouch or Belt Booster as part of the KS campaign?
At the end of the campaign, you will have the option to order the Small Core Unit, Accessory Pouch and Belt Booster through the ‘Backer Kit’ checkout system. Because the items were not part of the original campaign, there may be some shipping complications and the new Add-ons, may not have the same delivery date.
Last updated: November 17, 2019 16:42
Can I Access the Side Entrance with a Water Bottle in the Sleeve?
Yes, the water bottle pocket is part of the actual access door, so it doesn’t block the zipper. Of course, the access is slightly compromised due to the water bottle taking up space and having weight.
Last updated: November 17, 2019 16:42
How is the Volume Measured
We fill the bags will small objects until its full, the objects are then measured in measuring cup. Volume is not 100% accurate but very close.
Last updated: November 17, 2019 16:42
Do Explore Core Units fit in the Action X packs and vice-versa?
Yes, but our DV Core Unit only fit in the X70 pack and DV Roller. Make sure your specific pack is compatible with the Core Unit.
Last updated: November 17, 2019 16:42
Do I have to pay shipping twice if I order two packs?
No, if on the same order, the second pack costs an additional shipping charge but less than the Base Shipping Rate. Extra packs and rollers are an additional $15.
Last updated: November 17, 2019 16:42
Do we have to Pay VAT in Europe?
VAT is initially paid for by Shimoda’s European distributor when it is imported in the EU. You will not have to directly pay VAT.
Last updated: November 17, 2019 16:42
Are the shoulder straps interchangeable with Explore Series?
Yes, all of our current model packs use the same system.
Last updated: November 17, 2019 16:42
What bag would you recommend for...?
It depends on your needs, X30 is ideal for smaller camera bodies, people who are packing lighter loads or folks who want a bag that can exist in many scenarios from urban to mountain. X50, is our workhorse, if you need to carry a lot gear, you will want at least an X50. The X70 is for those who shoot bigger Video set-ups, want to camp or pack a lot gear to capture many different types of media.
Last updated: November 17, 2019 16:42
Do the Action X packs come with Accessory Straps?
No, The Action Series doesn’t include the additional Accessory Straps but it does come with a detachable Helmet Holder. The reason we chose not to include it was because we found only a portion of our customers used the included straps - adding the straps makes the bag $10 more expensive, and we decided it would not be fair to add that cost to all users. Action X has more complex construction techniques and we need to be mindful of the costs and what you the customer are willing to pay.
Last updated: November 17, 2019 16:42
How deep is the Top Loader when Extended
The Top Loader is 31cm deep - it maxes out with a body that is 13.5cm wide and 15cm tall. The lens diameter should be less than 11cm
Last updated: November 17, 2019 16:42
Can I be an Ambassador?
Our team is very full and our marketing budgets are exhausted. We are not looking to trade gear for images, but strangely enough we love it when you share them with us. When it comes to working with people, (when we have room or make exceptions) we are looking for folks who can expose our brand to large audiences. We welcome all emails but please understand 99% of the emails we receive for sponsorship will receive a similar reply. If you really want to part ofthe brand - the Shimoda community is valuable as our team - your best bet is to get a bag via the Kickstarter campaign.
Last updated: November 17, 2019 16:42
Are your bags waterproof?
No, our bags are not waterproof, but they are very water-resistant. We used what is called a Carbonate coating made from polyurethane resins. It’s applied in layers and spread over the Nylon textile, the Nylon then travels through an ‘oven’ where it cures into the base layer of Carbonate. This process occurs two more times to ensure that every area of the Nylon is covered and protected. This is one of the contributing reasons to why our material looks different. The process adds durability, abrasion resistance and excellent water resistance. That’s just the exterior though…
The underside has a spray-on laminate coating that is applied twice to help ensure the material is completely covered. The underside is not as protective as the outside, but lets the materials fold and flex better.
Last updated: November 17, 2019 16:42
Did every YouTuber’ get a new Action X bag?
No, but let me explain how it all works. We try to get packs in the hands of people who can review products and hopefully expose our new bag to a relatively large audience. Most of these are people we already have a good relationship with AKA ‘internet friends’. We have a product launch date and those putting out media know about the launch date. They are under NDA or an Embargo until that date. Naturally reviews will start to come out at roughly the same time as the product launch. There is no conspiracy or do we buy ‘good’ reviews. Most use referral links to financially supplement the tedious tasks of entertaining us on Youtube, we offer Affiliate referral links to our campaign - this info is not private and in fact public - anyone can have access to our referral links. It’s visible on the campaign page.
Last updated: November 17, 2019 16:42
Are the Reviews Paid for?
We had 2 paid reviews - Chase Reeves’ epic review of our bags and f-stoppers.com. The only reason we did this is because Chase is a professional bag reviewer and we genuinely love his contribution to the bag world. He provides excellent entertainment for people who like bags- where else will we ever get that? We need to keep him in business! F-stoppers makes it very clear when a review is ‘sponsored’. This isn’t our normal thing but we had a unique situation that allowed us to use credit to pay for the review. If Bo Ismono replied to my email, I would have been willing to pay for a review from him as well. Again - these guys are making a life around bags - we like to support that when we can. We are very confident in the new product, we don’t expect bad reviews because we believe in the gear and developed with so many people. Just because a review is ‘glowing’ doesn’t make the reviewer a’ shill’.
Last updated: November 17, 2019 16:42
What happens to the extra space if I use a Mirrorless Core Unit in a DSLR bag?
The bags are made from soft textiles, while they do not stretch, the material will adjust into place and fill the vacant space. So if you have gear in your front pocket, it will take over the space that is available in the main compartment - this sounds like a magic feature that we should use as a selling point, but it’s very simple and basic. As well, the bag has four compression straps to tighten the bag as needed - this would be a situation when you can do that.
Last updated: November 17, 2019 16:42
Why are there no side pockets on the X70?
The X70 is big bag primarily designed for dedicated Cine camera users, while you can use it for camping with a smaller Core Unit or just everyday adventures, it’s made for the Cine crowd. As a blanket statement - you do not want to sling a 70L pack under your arm to access your camera. The weight would be very uncomfortable and likely awkward. It will require you to use muscles you don’t likely use much and potentially cause a strain on your body. We also wanted very large side pockets to carry gear and water needed for big adventures and the ever evolving Cine gear market (gimbals, unique tripods, etc).
Last updated: November 17, 2019 16:42
Are there any other colors?
There is only Black and Army Green. Hosting more colors is a very expensive thing to do. It requires a lot of backend logistics and sales numbers to justify - we are not there yet.
Last updated: November 17, 2019 16:42
Does the Top Loader need two sets of Accessory Straps?
Yes, you need two sets. Two for the upper left and right and two for the bottom left and right.
Last updated: November 17, 2019 16:42
Does the Top Loader come with the Accessory Straps?
The Top Loader comes with a Shoulder Strap but does but does not come with the Accessory Straps. Not everyone will use the Accessory Straps and adding $20 to the cost wasn’t an option. It also creates waste when we add items that are not used by some.
Last updated: November 17, 2019 16:42
Does v2 Core Unit’s Side-Access work on the Explore Series packs?
It works fine but is not specifically designed to integrate into Explore Series, so it may look a little odd.
Last updated: November 17, 2019 16:42
Why are the new bags heavier than Explore Series?
Action X packs are built extra tough for extra rigorous action and adventure. As a result the materials are heavier. Durability comes at a price (AKA weight).
Last updated: November 17, 2019 16:42
Will these bags replace Explore Series?
No, we will continue to sell Explore Series.
Last updated: November 17, 2019 16:42
What is BackerKit?
BackerKit is a service that crowdfunded project creators use to keep track of hundreds to tens of thousands of backers—from shipping details, pledge levels, preferences and quantities, whether they have paid or had their card declined, special notes, and everything in between!
The BackerKit software and support team is independent from the campaign’s project team—BackerKit does not handle the actual reward shipping. For more information about the preparation or delivery status of your rewards, please check the project's updates page.
How does BackerKit work?
After the campaign ends, the project creator will send you an email with a unique link to your survey. You can check out a walkthrough of the process here.
I never received my invitation. How do I complete the survey?
The most common reasons for not receiving a survey email is that you may be checking an email inbox different from the email address you used to sign up with Kickstarter, Indiegogo or Tilt Pro account, or it may be caught in your spam filter.
Confirm that the email address you are searching matches the email address tied to your Kickstarter, Indiegogo, or Tilt Pro account. If that doesn’t work, then try checking your spam, junk or promotions folders. You can also search for "backerkit” in your inbox.
To resend the survey to yourself, visit the project page and input the email address associated with your Kickstarter, Indiegogo or Tilt Pro account.
How do I update my shipping address?
BackerKit allows you to update your shipping address until the shipping addresses are locked by the project creator. To update your address, go back to your BackerKit survey by inputting your email here.
When will my order be shipped, charged or locked?
That is handled directly by the project creator. BackerKit functions independently of the project itself, so we do not have control of their physical shipping timeline. If you want to check on the project’s status, we recommend reading over the project's updates page.
I completed the survey, but haven't received my rewards yet. When will they arrive?
As BackerKit does not actually handle any rewards or shipping, the best way to stay updated on the shipping timeline would be to check out the project's updates page.